|
|||||||||||||||||||
Proper Tube Preperation | |||||||||||||||||||
Tube Repair Procedure | |||||||||||||||||||
Tube Prices | |||||||||||||||||||
The Foster tubes are known throughout the Industry for being the "largest and Most Dependable". Our design characteristics are the reason the Foster tube has become the tube of "choice" for use , even on boats made by others.
The additional floatation offered by thelarger size, adds to the overall operational safety. The Foster tubes are made of P.V.C. material and the molding process used enables the tube to be made without any seams. THE FOSTER TUBES ALSO OFFER A SMOOTH SURFACE... A MUST IF YOU WANT TO CLEAN THEM. |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|
||||||||||||||||||
IMPORTANT!!! When using the Foster Tube on any other Bumper Boat that is not a Foster Product the Valve Stem MUST be facing down into the water. Do to the fact that all boats are somewhat different in size and style the valve stem might rub against the Boat Hull. The rubbing could cause the Valve Stem to leak at the base or even cause the valve to become loose. Before installing the tube spray soapy water around the valve stem to make sure there is not a leak and verify that the needle valve has been properly tightened. |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||