Floor Stand for use with 16" models

Push Pad Assembly, Hardened weldment that threads onto cylinder rod for pushing against tooling or work piece. For use on all 10&15 ton presses.

PP-2 For use on Model F1261A-25

Floor Stand for use with 24" Models

Floor Stand for use with "C" Frame Models

Toggle Switch Assembly. Replacement switch and chassis box cover. Interchanges with normally off Starter Button switch for continuous operation. For use on all models

Pressure Gauge, for use on all models. 0-3000 PSI, Oil-filled

Stroke Control Attachment. Assembles to the frame of the press, providing a variable stroke limiter. For use on all 10&15 ton presses

Steel Base Plate. Plate is 1-3/4" thick and is for use on "C" models C1161A and C1261A

Pull Adapter Assembly. Threads onto end of cylinder rod to enable cylinder to be used for pulling. For use on all 10,15&25 ton presses.